I am using the GA-MA790GP-DS4H with G. Skill F2-9600CL6D-4GBRH. I can't get the RAM to run in dual channel (ganged and unganged) at 800 MHz stock timings. On memtest86+ it fails test #1 and test #5. On single channel the RAM can only run at 800 MHz stock timing. Are there any timings needed to run the RAM reliably on DDR2-800 or DDR2-1066 in dual channel (unganged)?
Announcement
Collapse
No announcement yet.
GA-MA790GP-DS4H Issues
Collapse
X
-
I am using a Phenom II x2 555 BE. I tried what was suggested but it wouldn't work in dual channel (ganged and unganged) or single channel. The RAM only works in single channel at DDR2-800 5-5-5-15 2N (1.8v - 2.0v).
Do you have any other suggestions?
Comment
-
Ok, I tried what you suggested. And even tried it on another Gigabyte AM2+ board (GA-MA785M-US2H). I don't think the memory works with AMD's memory controller/Gigabyte AM2+ boards. I can't get the system stable with dual channel (ganged and unganged) at DDR2-800 or DDR2-1066.
So then am I SOL?
Comment
-
These were two separate systems. The one I was building were parts I got from as a gift. The other system I tested it on is my old system that I am using as a HTPC. They are using completely different parts, the cpu is not being reused, that is also a one of the other new parts.
Comment
Comment