Announcement

Collapse
No announcement yet.

F2-8500CL5-2GBPK with Gigabyte EP45-UD3P

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2-8500CL5-2GBPK with Gigabyte EP45-UD3P

    Hello,

    Please give me stable settings for 4 gigs of F2-8500CL5, I have the sticks in slots 2 and 4 and I upgraded to Gigabyte's latest BIOS FE.
    My processor is E8400. I tried a modest overclock but get some errors in Prime. Any suggestions welcome.

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.60GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 400Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.66D
    Memory Frequency (Mhz) ................: 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: 4
    tWTR...................................: 4
    tWR....................................: 6
    tRFC...................................: 54
    tRTP...................................: 4
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: 7
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 7
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.25000V
    CPU Termination.........1.200V.........: 1.200V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.200V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V

    DRAM
    DRAM Voltage............1.800V.........: 2.000V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]

  • #2
    Try your DRAM voltage at 2.1 and raise tRFC to 68, the rest looks pretty good.


    Pls offer comments on support I provide, HERE, in order to help me do a better job here:

    Tman

    Comment


    • #3
      and tWR 8

      Thank you
      GSKILL SUPPORT

      Comment

      Working...
      X