Announcement

Collapse
No announcement yet.

Help to config G.Skill. PI series 8GB (F2-8800CL5-2GBPI) with ASUS P5Q-E

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GSKILL TECH
    replied
    You should have a base value at DDR2-1066, then scale up from there to see adding more can improve stability. Try one Voltage at a time, then potentially both depending on results. Should not require much more than +0.1V for a jump from 1066 to 1100.

    Leave a comment:


  • Mojuku
    replied
    Originally posted by GSKILL TECH View Post
    It is trial and error testing to see what is most stable, or if the system is capable.
    What voltage do I go up? DRAM voltage and NB voltage at the same time or one of them only? Where do I start? I know this is trial and error, but give me a pattern to follow or a reference. That's what I'm asking from the beginning. At 1066 I have managed to make it stable, now only the stable is 1100.

    Leave a comment:


  • GSKILL TECH
    replied
    It is trial and error testing to see what is most stable, or if the system is capable.

    Leave a comment:


  • Mojuku
    replied
    Originally posted by GSKILL TECH View Post
    Try adjusting both values to see if stability can be improved.
    Please can you help me to adjusting values?
    I do not know where to start...

    Leave a comment:


  • GSKILL TECH
    replied
    Try adjusting both values to see if stability can be improved.

    Leave a comment:


  • Mojuku
    replied
    Originally posted by gskill tech View Post
    increase dram voltage to see if that can improve stability. What is your nb voltage?
    DRAM voltage: 2.10
    NB voltage: 1.40

    Leave a comment:


  • GSKILL TECH
    replied
    Increase DRAM Voltage to see if that can improve stability. What is your NB Voltage?

    Leave a comment:


  • Mojuku
    replied
    Originally posted by GSKILL TECH View Post
    Yes indeed
    Hi.

    I've been testing the same voltage values ​​I had in 1066 and playing Guild Wars 2 I had a blue screen "MEMORY_MANAGEMENT"

    I'm tested memory with Aida 64 and these are the results.

    Leave a comment:


  • GSKILL TECH
    replied
    Yes indeed

    Leave a comment:


  • Mojuku
    replied
    Originally posted by GSKILL TECH View Post
    Yes, and may need to adjust Voltages based on results, so testing is necessary.
    żAida64 is a good reference of benchmark test?

    Leave a comment:


  • GSKILL TECH
    replied
    Yes, and may need to adjust Voltages based on results, so testing is necessary.

    Leave a comment:


  • Mojuku
    replied
    Originally posted by GSKILL TECH View Post
    Then test it. How do those settings work? Did you run a benchmark test?
    Should I just change the FSB? Don't I have to configure anything else to make it stable at 1100? (In the previous photo i only show that is possible reach 1100).

    Leave a comment:


  • GSKILL TECH
    replied
    Then test it. How do those settings work? Did you run a benchmark test?

    Leave a comment:


  • Mojuku
    replied
    Originally posted by GSKILL TECH View Post
    Looks good, have you tried increasing FSB Frequency to see if it can reach 1100?
    Yes, you can see it, but i need to know a stable config for this.
    Thx.
    Attached Files

    Leave a comment:


  • GSKILL TECH
    replied
    Looks good, have you tried increasing FSB Frequency to see if it can reach 1100?

    Leave a comment:

Working...
X