Motherboard: MSI RX480 Neo2 Socket 939
Memory: F1-3200PHU2-2GBNS
CPU: AMD Athlon64 4000+
Upgrading from 1GB of Kingston KVR PC3200, installed the two sticks of G.SKILL and hit the power button. Power comes on, fans start, lights on...but no boot. "No signal" message on monitor. Re-installed the KVR and it boots up fine.
I checked the BIOS and it says the motherboard is capable of 2.5V-2.85V (though the MSI fact sheet says differently: http://www.msi.com/product/mb/RX480-...l#/?div=Detail), and with the KVR installed is running at 2.6V. I can't seem to find a way to manually change this setting. Could low voltage be causing the problem, and if so, what can I do about it?
Thanks in advance
Memory: F1-3200PHU2-2GBNS
CPU: AMD Athlon64 4000+
Upgrading from 1GB of Kingston KVR PC3200, installed the two sticks of G.SKILL and hit the power button. Power comes on, fans start, lights on...but no boot. "No signal" message on monitor. Re-installed the KVR and it boots up fine.
I checked the BIOS and it says the motherboard is capable of 2.5V-2.85V (though the MSI fact sheet says differently: http://www.msi.com/product/mb/RX480-...l#/?div=Detail), and with the KVR installed is running at 2.6V. I can't seem to find a way to manually change this setting. Could low voltage be causing the problem, and if so, what can I do about it?
Thanks in advance
Comment