HOW TO SET SSD TO Disk 0?

[SMELZBAD]

Can anyone tell me how to make a disk be "Disk 0" in Disk Management?

I'm trying to upgrade firmware on a 128GB Falcon II SSD. Apparently this can only be done if the SSD is listed as Disk 0 in Disk Management.

I have OS installed on the Falcon II disk.
I have mirror of falcon disk on and IDE drive.

I need to be able to boot from the mirror on the IDE drive so I can do the firmware ugrade on the SSD.

When I set boot priority in BIOS for the IDE to boot ahead of the SSD, the IDE drive becomes Disk 0 in Disk Management...

Is the BIOS boot sequence the only way to change assigned Disk #s in Disk Management???

How can I get this SSD to be Disk 0 and still boot from the IDE drive?

Thanks for any help with this!

[G.SKILL]

Hi,

please connect your SATA port to SATA 0, and your SSD will showing disk 0

[SMELZBAD]

Thanks for the response but this doesn't work because the IDE drive that I have to boot off of if I'm going to flash the SSD gets assigned "Disk 0"...my 2nd IDE drive gets assigned "Disk 1" and the SATA drive on SATA port 1 gets assigned "Disk 2"...