Tweet
PC has suddenly stopped booting with AMD EXPO enabled
I have a system with G.Skill memory kit, Product Code: F5-6000J3636F16GX2-FX5. Today my PC suddenly stopped booting and upon checking I saw that the DRAM and CPU error LED on my motherboard were ON. Upon further investigating the PC booted properly when disabling EXPO and using the default RAM settings. I was using my system using the AMD EXPO profile without any issues since I built my system in March this year. I am unable to understand why this would happen all of a sudden. My last BIOS update was a month ago and I haven't done any changes to my PC recently in terms of hardware or software. Has anyone encountered this recently. This is what I've tried so far:
1. I have a dual slot motherboard, so the memory slots are correct.
2. I have tried clearing the CMOS using the motherboard vendor guide and then enabling EXPO. This didn't change anything and the computer refused to boot.
3. I have tried using a single RAM stick, tested both sticks individually and tested both slots individually by using one stick at a time but the computer still refuses to boot.
My system specs are as follows:
CPU - AMD Ryzen 7 9800X3D
RAM - G.Skill FlareX 2x16GB 6000Mhz CL36 F5-6000J3636F16GX2-FX5
Mobo - ASRock B650M HDV/M2
GPU - RTX 5070 Ti
PSU - Deepcool PM750D
1. I have a dual slot motherboard, so the memory slots are correct.
2. I have tried clearing the CMOS using the motherboard vendor guide and then enabling EXPO. This didn't change anything and the computer refused to boot.
3. I have tried using a single RAM stick, tested both sticks individually and tested both slots individually by using one stick at a time but the computer still refuses to boot.
My system specs are as follows:
CPU - AMD Ryzen 7 9800X3D
RAM - G.Skill FlareX 2x16GB 6000Mhz CL36 F5-6000J3636F16GX2-FX5
Mobo - ASRock B650M HDV/M2
GPU - RTX 5070 Ti
PSU - Deepcool PM750D
Comment