Hi ,
my pc configuration:
cpu: AMD FX-8350
mb: GA-970A-DS3P (rev. 1.0)
ram: 16gb (4x4gb) DDR3 1866 (PC3 14900) Model F3-14900CL8D-8GBXM
hard disk: SSD Samsung Evo 850 250gB
First my PC was running only on 8GB(2x4gb) of the above mentioned ram, it worked perfectly on XMP Profile 1 settings 1866 (933mhz), after that i thought to upgrade the ram so I bought other 8GB of the same sticks(2x4gb) to have total of 16.
The problem is that my pc won't boot windows 10 with XMP Profile 1 and 2 set blue screen errors saying contact the administrator. But it does boot when XMP Profile 1 and 2 are disabled.
I even tried manualy to edit the timings but then the bios won't even start.
What do you suggest ?
PS: I didn't buy this ram to run it on 1600 and those timings with XMP disabled
my pc configuration:
cpu: AMD FX-8350
mb: GA-970A-DS3P (rev. 1.0)
ram: 16gb (4x4gb) DDR3 1866 (PC3 14900) Model F3-14900CL8D-8GBXM
hard disk: SSD Samsung Evo 850 250gB
First my PC was running only on 8GB(2x4gb) of the above mentioned ram, it worked perfectly on XMP Profile 1 settings 1866 (933mhz), after that i thought to upgrade the ram so I bought other 8GB of the same sticks(2x4gb) to have total of 16.
The problem is that my pc won't boot windows 10 with XMP Profile 1 and 2 set blue screen errors saying contact the administrator. But it does boot when XMP Profile 1 and 2 are disabled.
I even tried manualy to edit the timings but then the bios won't even start.
What do you suggest ?
PS: I didn't buy this ram to run it on 1600 and those timings with XMP disabled
Comment