id like to say I have done the fallowing set up with this build set up
MB; AUSU SABERTOOTH 990FX R3.0
CPU; AMD FX 8350 BE
GPU; FXF RX 480 8GB
RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
DDR3-1866 CL9-10-9-28 1.5V
XMP PC3-1400 4GBX2
DONE THE FALLOWING
[FX or A Series CPU]
Method 1.
A. Enable DOCP/EOCP in BIOS.
a. If unstable, raise CPU-NB Voltage in addition to the above.
B. Set CPU-NB Voltage +0.05V to +0.1V depending on stability
C. F10, save, exit, and everything should be ready to go.
Method 2.
A. Set DRAM Frequency to DDR3-1866
B. Set DRAM Timings to tCL - tRCD - tRP - tRAS - Command Rate
(that the memory is rated for)
C. Set DRAM Voltage to what the memory is rated for.
(Manually set even if default 1.50V)
D. Set CPU-NB Voltage +0.05V to +0.1V depending on stability
E. F10, save, exit, and everything should be ready to go.
on that note my ram is running @ a freq of 936.15 but with windows memory issues
MB; AUSU SABERTOOTH 990FX R3.0
CPU; AMD FX 8350 BE
GPU; FXF RX 480 8GB
RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
DDR3-1866 CL9-10-9-28 1.5V
XMP PC3-1400 4GBX2
DONE THE FALLOWING
[FX or A Series CPU]
Method 1.
A. Enable DOCP/EOCP in BIOS.
a. If unstable, raise CPU-NB Voltage in addition to the above.
B. Set CPU-NB Voltage +0.05V to +0.1V depending on stability
C. F10, save, exit, and everything should be ready to go.
Method 2.
A. Set DRAM Frequency to DDR3-1866
B. Set DRAM Timings to tCL - tRCD - tRP - tRAS - Command Rate
(that the memory is rated for)
C. Set DRAM Voltage to what the memory is rated for.
(Manually set even if default 1.50V)
D. Set CPU-NB Voltage +0.05V to +0.1V depending on stability
E. F10, save, exit, and everything should be ready to go.
on that note my ram is running @ a freq of 936.15 but with windows memory issues
Comment