F3-17000cl11d-8gbxl

[thiagobh]

Using gskill ripjaws 2133 2x4gb... in mb. gigabyte z68x ud4 b3 ... i cannot run in 2133... only in xmp but system are getting blue screen.

if I set SPD multiplier to 21.33 after reset it not work.. overclock fail.

version bios f8.

this memory can be used in this mb?

[coolhandluke41]

F3-17000cl11d-8gbxl

can you post your bios settings ? i have Asus MB but will try to help if i can
can you post or BSOD ?
manually change your timings to 11-11-11-30-2T
bump your VCCIO to 1.15v and DDR voltage to 1.55v~1.57v

I'm testing this kit right now@2133 10-11-10-30-2T (1.55v < i want to see how low i can run them)

[thiagobh]

ok I will take a picture and post here... maybe I can do this still today.

[thiagobh]

Hi coolhand...

I put vtt 1.15, voltage dram 1.55 now the pc starts....


I wanna make some tests and report u again..

It is a great begin... Starts without fail the overclock hehe

Regards

[coolhandluke41]

F3-17000cl11d-8gbxl

I'm glad you have them running ,sorry couldn't get back to you ..little busy,any way
i think the best timings for this sticks (24/7) is 10-11-10-27-2T ( VCCIO 1.125v) ( 1.575v)
you can run them @ 1T but the extra voltage is not worth the hassle


was having a bit of fun with them ..got them up to 2240Mhz


Hyper PI stable;


This are not top of the line RAM but for the money i'm very happy,enjoy and
good luck

[fviper]

Sorry mu poor English. My GSKILL F3-17000CL11D-8GBXL only run at 1866 Mhz in DDR3_1 and DDR3_3. Change my memoty to DDR3_2 and DDR3_4 and .... run @2133 Mhz very good

[fviper]

rest of parameters in AUTO

[fviper]

Sorry, my mother is GA Z68X UD7 B3