G.Skill F3-17000CL9D-4GBXL & ASUS P8P67 PRO

[rasheyz]

3 Weeks back i bought hardware to built my pc.

ASUS P8P67 PRO
CPU 2500K
G.Skill F3-17000CL9D-4GBXL

after setup when pressed start buton, CPU and VGA fans start working, CPU, VGA & RAM LEDs flashed and off, then at last power LED permenant ON and same time boot_device_led also permenant ON, Fans were working but no POST screen.
I sent back power supply and found DOA, replaced with new 1, same problem, sent Motherboad & CPU, but found working. Now I am planning to send new power supply again for RMA even it seems very fine.
I need to ask if it can be RAM problem to stop pc to boot. i have 2 HD6850 VGA cards. tested both but same problem.
in your knowledge if it can be RAM problem, so it will help me to RMA RAM.
Please help me.

Regards

[GSKILL TECH]

Reset the BIOS with the CLRTC button or pins, then go into BIOS, enable XMP, and see if that works better.

If not, send the memory in for RMA to see if that solves your problem.

Thank you
GSKILL TECH