Tweet
Need BIOS settings for using F3-17600cl7d-4gbpis memory and EVGA P55 Classified MB
Hello,
I have a new PC based on EVGA P55 Classified 200 motherboard, Intel i7-870 processor, and a 4 gb kit of G.Skill F3-17600CL7D-4GBPIS memory. I have set memory timings to XMP 1 profile, which is the recommended settings for memory. DIMM voltage has been set to 1.65v as per memory spec. When I run MemCheck, it says my memory is failing on each pass.
What adjustments should be done to get this memory stable at its rated speeds?
Current Memory Info:
DRAM Freq=1099.7 MHz
FSB/DRAM=2/12
CAS Latency (CL)=7
RAS to CAS Delay (tRCD)=10
RAS Precharge (tRP)=10
Cycle Time (tRAS)=28
Refresh Cmd Delay (tRFC)=100
Command Rate (CR)=2T
I have a new PC based on EVGA P55 Classified 200 motherboard, Intel i7-870 processor, and a 4 gb kit of G.Skill F3-17600CL7D-4GBPIS memory. I have set memory timings to XMP 1 profile, which is the recommended settings for memory. DIMM voltage has been set to 1.65v as per memory spec. When I run MemCheck, it says my memory is failing on each pass.
What adjustments should be done to get this memory stable at its rated speeds?
Current Memory Info:
DRAM Freq=1099.7 MHz
FSB/DRAM=2/12
CAS Latency (CL)=7
RAS to CAS Delay (tRCD)=10
RAS Precharge (tRP)=10
Cycle Time (tRAS)=28
Refresh Cmd Delay (tRFC)=100
Command Rate (CR)=2T
Comment