Settings F3 12800CL7D 4GBRM on Asus P7P55D-E

[mrap]

Hi All

Can someone tell me how to config this mems in bios settings?

i cant get them to work at 7-7-7-24 1600 only at 7-8-7-24 1333 and i dont know whats the problem.

Sistem specs:
Antec tp-750
GTX460 oc
Cooler Master hyper 212 Plus
Asus P7P55D-E
Samsung F3 500GB
Intel I5 760 @ 2.80
Gskill PC12800 4GB RIPJAWS CL7 DDR3

Thanks

[wevsspot]

Are you sure you're using the correct timings. In your post you say you can't get them to work at DDR3 1600 speeds with timings of 7-7-7-24. But that memory kit is rated for 7-8-7-24 timings.

Double check your timings, command rate and dram voltage. They should be;

7-8-7-24
2T Command Rate
1.60 Dram Voltage

Ensure that you have the memory modules installed into the Blue DIMM slots.

What method are you using to push the memory to their rated speed? upping the BCLK or using the XMP profile or DRAM O.C. Profile?

[mrap]

your wrong!!

here are the memory specs:

Specification



Main Board intel
System Desktop
System Type DDR3
M/B Chipset Intel P55
CAS Latency 7-7-7-24-2N
Capacity 2GB (1GBx2) /

4GB (2GBx2)

Speed DDR3-1600 (PC3 12800)
Test Voltage 1.65 Volts
PCB
Registered/Unbuffered Unbuffered
Error Checking Non-ECC
Type 240-pin DIMM
Warranty Lifetime

[wevsspot]

Well, if you're content yelling at me with !! then I'll just step aside and let someone else help you.

I pulled your specifications right off of G.Skill's site;
http://www.gskill.com/search.php?sea...BDTDdELTRHQlJN

So if I'm wrong then so are they.

Regards,

[GSKILL TECH]

Enable XMP under Ai Overclock Tuner and everything should be fine.

Thank you
GSKILL TECH