Gskill F3-16000CL9T-6GBRH compatibility

[gamefreak]

hi,
i'm currently building a corei7 + x58 + gskill system ( as my current system went down)

im looking to buy gskill for their superior speed and performance but im little bit confused whether it will be fully compatible with the system

hardware
------------
core i7 950
evga x58 sli ( only sli not the classified one )
Gskill F3-16000CL9T-6GBRH

i will overclock the processor to ~4ghz.
so is the Gskill F3-16000CL9T-6GBRH going to work smoothly with it ?
or it will make some kind of problem ?
4ghz processor and 2000mhz ram will work fine na ?

thanks

[GSKILL TECH]

No problem at all, search the internet, many people love it.

Thank you
GSKILL TECH

[gamefreak]

re

ok i have decided to buy F3-16000CL9T-6GBTD (2Gx3) .
but i wanna run 'em on 1600 mhz ( as it doesnt really deffer in speak of performance ) instead of 2000mhz to achieve tighter timings.
how much lower timing can i expect ? ( by stock its 9-9-9-24-2N )

thanks.

[GSKILL TECH]

7-7-7-21 is no problem, you can then try lower. The lowest should be 6-7-6-18.

Thank you
GSKILL TECH

[gamefreak]

timing

thanks
can u give me full details ( timing + settings ) for this modules @ 1600mhz
my setup is

core i7 950 @ stock
gigabyte GA-EX58A-UD7
Gskill F3-16000CL9T-6GBTD

thanks

[GSKILL TECH]

In MIT (MB Intelligent Tweaker):

System Memory Multiplier - 12

DRAM Timing Selectable - Manual

CAS Latency Time - 7
tRCD - 7
tRP - 7
tRAS - 21

Enter these for the other three as well.

Channel A Timing Settings

Advanced Timings
Command Rate - 2

DRAM Voltage - 1.600V
Rest to AUTO

Thank you
GSKILL TECH

[gamefreak]

volt

isnt it suppose to run @ 1.65 v ?

[gamefreak]

what volt

what voltage should i put ? 1.65 or 1.6 ?
thanks

[GSKILL TECH]

Whatever it is on the memory. Some are 1.60V, some are 1.65V

Thank you
GSKILL TECH

[flash.pc]

7-7-7-21 is no problem, you can then try lower. The lowest should be 6-7-6-18.

Thank you
GSKILL TECH

My Trident kit (Gskill F3-16000CL9T-6GBTD rated at 1.60V) can't run @ 6-7-6-21.
I tried almost everything but always got a lot of Memtest errors.
Is my kit faulty? Is this a valid motivation for RMA?

Thanks

UPDATE: Errors even @ 7-7-7-21 (1.60V)

[gamefreak]

set command rate to 2N

[GSKILL TECH]

Try raising tRFC to 80.
tRTP 7

You can also see if 1.65V is stable, in case 1.60V is slightly not enough.

Keep us posted on the results.

Thank you
GSKILL TECH

[flash.pc]

This is the result... (1.66V in bios)

[GSKILL TECH]

tRTP is showing 9, also, have you tried 2T?

Thank you
GSKILL TECH

[flash.pc]

Regarding tRTP I set 7 in BIOS but CPU-Tweaker shows 9.
Yes I also tried 2T.