Badly need specifications of F3-12800CL7D-4GBRH

[element22]

Hi there,
I badly need the exact specifications of G.Skill RipJaws DIMM Kit 4GB PC3-12800U CL7-7-7-24 (DDR3-1600) (F3-12800CL7D-4GBRH).
My Gigabyte GA-870A-UD3, 870 doesn`t detect them right. To configure them manually I need:
CAS# latency:
RAS to CAS R/W Delay:
Row Precharge Time:
Minimum RAS Active Time:
1T/2T Command Timing:
TwTr Command Delay:
Trfc0 for DIMM1:
Options are: 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc2 for DIMM2:
Options are: 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc1 for DIMM3:
Options are: 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc3 for DIMM4:
Options are: 90ns, 110ns, 160ns, 300ns, 350ns.
Write Recovery Time:
Precharge Time:
Row Cycle Time:
RAS to RAS Delay:
Thank you,
Ele

[wevsspot]

Ele,

The only adjustments you might need to make are to the four primary memory timings, the command rate and the dram voltage.

For your kit that would be;
7-7-7-24
2N Command Rate
1.65 Dram Voltage

Everything else should be left on auto.

[element22]

The problem is that there is no auto.
I still need the exact specifications for:
TwTr Command Delay4T,5T,6T,7T)
Trfc0 for DIMM1:
(Options are: 90ns, 110ns, 160ns, 300ns, 350ns.)
Trfc2 for DIMM2:
(Options are: 90ns, 110ns, 160ns, 300ns, 350ns.)
Trfc1 for DIMM3:
(Options are: 90ns, 110ns, 160ns, 300ns, 350ns.)
Trfc3 for DIMM4:
(Options are: 90ns, 110ns, 160ns, 300ns, 350ns.)
Write Recovery Time5T,6T,7T,8T,10T,12T)
Precharge Time: (4T,5T,6T,7T)
Row Cycle Time11T,12T,13T,14T,15T,16T,17T,18T,19T,20T,21T,22T,23 T,24T,25T,26T,27T,28T,29T,30T,31T,32T,33T,34T,35T, 36T,37T,38T,39T,40T,41T,42T)
RAS to RAS Delay4T,5T,6T,7T)
I wrote you the possible values I can choose in bios in ().
I don`t want to damage my ram so I need this values. If you don`t want or are allowed to post them here please send me them by private message as they done it by my old ram from OCZ before.
Thanks.

[GSKILL TECH]

What CPU do you have? Not all AMD CPUs can operate this memory spec.

Thank you
GSKILL TECH

[element22]

I have an AMD Phenom II X6 1090T Black Edition, 6x 3.20GHz, boxed (HDT90ZFBGRBOX).
Nothing is overclocked or something like that.
Thank you
Ele

[wevsspot]

The problem is that there is no auto.
Thanks.

Wow - that's a new one on me..................

[cravinmild]

i bought the 1055T and i had to be very carefull when i bought the ram. AMD is a hard board to buy "excotic" ram for. Try the AMD forums, good guys there if you pose the question right. I have found that the mobo makers dont all ways list the compatible ram correctly at their sites.

I would have wanted to get a more aggressive ram also but was afraid of it not posting when i put everything together so i went with some safe CL9. Hope it works out for you. good luck

[element22]

Ele,

The only adjustments you might need to make are to the four primary memory timings, the command rate and the dram voltage.

For your kit that would be;
7-7-7-24
2N Command Rate
1.65 Dram Voltage

Everything else should be left on auto.

Wow - that's a new one on me..................

For everything else there is no auto. Just for those values which we already got.

I would have wanted to get a more aggressive ram also but was afraid of it not posting when I put everything together so i went with some safe CL9. Hope it works out for you. good luck

CL9 is not acceptable. If I would use CL9 I would had brought Ram with CL9. But thanks