F3-12800CL9Q and Asus M4A88TD-M

[mperkel]

Just wondering about compatibility between the new Asus M4A88TD- and F3-12800CL9Q

I got it to work with info here from another Asus board by manually jacking up 3 voltage settings. I was wondering about future compatibility. Can I assume that a future ROM will be compatible? Just wondering what G.Skill has to say about this.

[GSKILL TECH]

They will indeed be compatible. We work side by side with ASUS to bring you the best.

Thank you
GSKILL TECH

[mperkel]

How I got it to work

In case someone else has the same problem I do.

On power up press the memory button on the motherboard to get it to come up at all. Once you have it up if there's a bios upgrade - install it. Here's the manual setting I set because as of May 5 the bios isn't compatible.

DRAM Voltage 1.6
HT Voltage 1.4
NB Voltage 1.2

My ROM version is 1104. In the future a newer one might just work.

[GSKILL TECH]

Thank you for the valuable information. Additional voltage is needed when operating more than 2 modules, but once it is supplied, everything should run just fine as you have discovered.

Thank you
GSKILL TECH