could boot with one module

[thomas17]

sorryy for my bad english... i'm french

my config :

Corsair TX - 650W
G.Skill Kit Extreme3 2 x 2 Go PC10600 Ripjaws ( F3-10666CL7D-4GBRH)
Gigabyte GA-P55-UD3R
Intel? Core? i5 750
Noctua NH-U12P SE2
Sapphire Radeon? HD 4890 1 Go Vapor-X
Seagate Barracuda 7200.12 S-ATA - 1000 Go - 32 Mo
Terratec Cinergy 2400i DT

I have could boot

when i start my pc with one stick ram there have any problems, with stick one or with stick 2
when thers are two stick on my pc i have could boot

i do 17 pass with memtest V4 and my two stick and there are 0 errors

i used XMP, make a test with manually input parameters for have 1333mhz (*10, 1.5V, 7-7-721...)
i have updated bios F4

i read on forum could boot = replace RAM

i want to know if you think i must replace ram , with my 0 errors on 17 pass

thanks

Thomas

[GSKILL TECH]

Try increasing QPI/VTT Voltage to 1.20V. If that does not help, simply send them in for new replacements and that should solve the problem.

Thank you
GSKILL TECH