Problems with GSkill Trident 16000 2000MHZ

[S666S]

As many people have posted i cant reach the announced 2000MHZ frequency i used the bios specs posted in the forum but my pc wont boot it stays locked any help would be appreciated my systems specs are:

Intel i7 920
Corsair Modular 1000Wtts
Asus Rampage Gene II
Gskill Trident 16000 2000MHZ 3x2
Asus Geforce GTX 285
WD Velociraptor 300Gb

Thanks in advance.

[GSKILL TECH]

Try these settings:

AI overclock - manual
CPU Ratio setting - 21
CPU Turbo Power Limit - disable

CPU configuration
CPU Ratio Setting - 21
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - disable
Execute Disabled bit - disabled
Intel HT Technology - disable
Active Processor Cores - all
A20M - disabled
Intel C-STATE tech - disabled

BCLK frequency - 143
PCIE frequency - 100
DRAM frequency - 2002 MHz
UCLK frequency - 4004 MHz
QPI frequency - auto

Dram Timing Control
DRAM CAS# Latency - 9
DRAM RAS# to CAS# Delay - 9
DRAM RAS# PRE Time - 9
DRAM RAS# ACT Time - 24
DRAM REF Cycle Time - 74
DRAM Timing Mode - 2N
All others can be on AUTO

EPU II Phase Control - Full Phase
Load-line calibration - enable
CPU differential amplitude - auto
Extreme OV - disabled

CPU PLL voltage - 1.85V
QPI-DRAM voltage - 1.60V

DRAM Bus voltage 1.60V

Thank you
GSKILL TECH