F3-12800CL7-2GBRH and P55A-UD6

[guygox]

Hi,

I have a Gigabyte P55A-UD6 with F3-12800CL7-2GBRH (2X2Go) running under Seven 64 bits. On Gskill's website this memory is said compatible.
Everytime I start my computer I have a BSOD. Then I must shutdown my computer with the power switch. And then it starts normally.

Then I have no problem running my OS. My computer is stable.

I activated XMP.
My values are :
Cas Latency 7
Ras to cas 7
Ras Precharge 7
tRAS 24
tRFC 127
Command Rate 2T
Voltage 1,6.

CPUZ SPD tells me:
XMP-16600
CL 7
Ras to cas 7
Ras precharge 7
tRAS 24
tRC 34
command Rate 2T
Voltage 1,6

So my values seems to be OK.

What should I do??

[GSKILL TECH]

Send the memory in for new replacements and the new set should work just fine.

Thank you
GSKILL SUPPORT

[guygox]

If I just power on my computer and run memtest I have error on each one. But if I shut it down with power switch and test them, now error during more than 7 pass...
So do you really think my modules have problem?

[GSKILL TECH]

Try increasing QPI/VTT Voltage to 1.25V.

Thank you
GSKILL TECH