Problem reports

[dybek]

Hello this is my pc, now I say the problem:

INTEL CORE I7
ASUS P6T-SE
F3-10666CL9T-3GBNQ


I know what values to work reports since 1333 are now not at that speed, you could bring me what I have to put in the BIOS ...

GREETINGS AND THANKS

[GSKILL TECH]

The system should automatically detect all memory settings for you, but double check that they are set as follows:

DRAM Frequency - DDR3-1333
DRAM Timings - tCL 9 - tRCD 9 - tRP 9 - tRAS 24 - Command Rate 2
DRAM Voltage - 1.50V

Thank you
GSKILL TECH

[dybek]

Hi, I have not overclock the processor I get to put the memory at that speed.
I suppose that if the DRAM Timing Control, put the same cop parameters with speed memory

regards

[dybek]

You tell me what I have to put in Timing Control

[GSKILL TECH]

DRAM Timing Control
CAS Latency - 9
tRCD - 9
tRP - 9
tRAS - 24
Command Rate - 2N

Thank you
GSKILL TECH

[dybek]

Hello, I get nothing but I have the pc overclock and I get the speed that putting it in the Timing Control, you can tell me all the data timing control, as it is.

regards

ah, if I put the memory at 1600 mhz is very hot??

[GSKILL TECH]

Yes, the memory can be hot, or more than hot especially if you do not have the voltages manually set.

Thank you
GSKILL TECH

[dybek]

Hey, hey put the voltage manually, if I put the memories of 1600 might be some risk of burning or something?

regards

[GSKILL TECH]

Your memory, especially if you are overvolting it, but as long as you keep them cool they should be fine.

Thank you
GSKILL SUPPORT

[dybek]

Is there any way to see how this temperature?? have if I'll make and burn ....

regards

[GSKILL TECH]

infrared thermometer? You will need an external device.

Thank you
GSKILL TECH

[dybek]

Look, my box has a fan on the side that gets air (is big) and a front which also gets aire.one that takes up air, I guess it will be fine if I put them at 1600MHz?
look this is the case COOLER MASTER HAF 932