F3-12800CL9T-6GBNQ @ 1333 or 1066

[mipbar]

What timings/voltages should I run this memory at 1333 or 1066 ? Same as 1600? 99924 2n 1.5v?

Reason I ask is that I already had this memory in my M/B before realizing a tiny little note saying 12GB isn't supported on the Asus Rampage II Gene at 1600.

So, I ordered another 6gb to go to 12GB and will most likely have to run it at 1333 or 1066 to get the full 12, won't know until it arrives.

Thanks

[GSKILL TECH]

It's worth a shot, you may be able to stabilize it by increasing some voltages such as the QPI/DRAM Voltage to 1.45V-1.50V.

But at DDR3-1333, you can simply use 8-8-8-24-2N 1.50V

Thank you
GSKILL TECH

[mipbar]

Excellent, thanks. I'm getting the memory in 2 days. I'll try to get 12 at 1600, if that doesn't work I'll set them back to 1333 at 8's. Thanks again.

Any other settings I should try other than QPI?

[GSKILL TECH]

Yea, some CPU overclocking settings =) but we can do that afterwards if you are interested.

Thank you
GSKILL TECH

[mipbar]

Just booted up. It saw 10gb without any changes. I set the QPI/DRAM voltage to 1.44, which shows up as yellow "warning"

I hard booted, and it sees 12gb. No crashes or locks so far. Hoping this is stable and wont fry anything.