gigabyte x58a-ud3r / F3-12800CL7T-6GBPI - memtest freezing

[taltair]

Hi Gskill,

Here is my setup and issue.

I7- 920
gigabyte x58a-ud3r
F3-12800CL7T-6GBPI
Intel SSD G2

With normal bios settings defaults , I am not able to run memtest with out it crashing.
It stops at 4 sec or 7%

I am not sure about what defaults should be , Im not looking to overclock . Just for the system to be able to run memtest

I have already flashed the bios to latest one which is 03/12/2010
Gigabyte recommends this version of memory for the board
F3-16000CL9T-6GBTD

Can you tell me the difference ?

Any help would be appreciated

Thanks

[GSKILL TECH]

Please try the following settings in BIOS:

CPU Clock Ratio - 21x
QPI Link Speed - AUTO
Base Clock Control - Enabled
BCLK Frequency - 143
Performance Enhance - Standard
Extreme Memory Profile - Disabled
System Memory Multiplier - 14

Uncore & QPI Features
Uncore Frequency - 4000

DRAM Timing Selectable - Manual

CAS Latency Time - 9
tRCD - 9
tRP - 9
tRAS - 24

Enter these for the other three as well.

Channel A Timing Settings

Advanced Timings
Command Rate - 2

Advanced Voltage Control
Load-Line Calibration - Disabled
QPI/VTT Voltage - 1.60V
CPU PLL - 1.900V

PCIE - AUTO
QPI PLL - 1.300V
IOH Core - 1.400V
ICH I/O - 1.600V
ICH Core - 1.300V
DRAM Voltage - 1.640V
Rest to AUTO

Thank you
GSKILL SUPPORT

[taltair]

Hello,

Memtest 3.5 is still freezing at 4 seconds or 7%

Anything else I can try ?

Thanks

[GSKILL TECH]

Try memtest 4.0 instead. Is the system stable? As far as booting into Windows, running programs, etc.?

Thank you
GSKILL SUPPORT

[taltair]

Ok. Ill try that version.

Yes I dont have any problems with hang ups or freezes . System is stable . Everything is okay except for memtest.

Thanks