Best settings for F3-17066CL9-2GBPS on GA-x58A-UD7

[ropittbul]

Hello.

What is the best settings for F3-17066CL9-2GBPS on GA-x58A-UD7 .
I use F6 bios. I am intrested in using 2000mhz speed.
I use i920 , good cpu ( 4000/1.266 - 4200/1.312 - 4400/1.408 ) But i tasted the memory with 12X multi to be sure .

Vddr = 1.66v

I used qpi vtt = 1.595 910924 T2 and also 99924 T2 . No luck ... error in Linx 3-5 min.

I don't know to set all the timmings in bios for this speed .

Pls someone who know how to set in the bios

[GSKILL TECH]

Post up pictures of your BIOS and I can see what you may have set incorrectly. Have you tried testing each module individually? You may want to do so to make sure none are defective.

Thank you
GSKILL SUPPORT

[ropittbul]

There are not defective none of them for sure.

This are the settings :

Advanced Dram Features

Performance Enhance - Turbo
Extreme Memory Profile ( XMP ) – Disable
Sistem Memory Multiplier ( SPD ) – 10.0
Memory Frequency ( mhz ) – 2000
DRAM Timing Selectable ( SPD ) – Quick ( can be auto or expert , can select settings for each modul , quick is for all 3 in the same time )
Profile DDR voltage - 1.66
Profile QPI voltage – 1.575
Channel Interleaving 6 – auto
Rank Interleaving 4 – auto

Channel A/B/C Timing Settings Sub Menus

Channel A/B/C Standard Timing Control

CAS Latency Time - 9
tRCD - 9
tRP – 9
tRAS - 24

Channel A/B/C Advanced Timing Control

tRC – auto
tRRD – auto
tWTR – auto
tWR – auto
tWTP – auto
tWL – auto
tRFC – auto
tRTP – auto
tFAW – auto
Command Rate ( CMD ) – 2

Channel A/B/C Misc. Timing control

B2B CAS Delay - auto
Round trip Latency - auto


What CPU-Tweaker 1.4 reports in win :

tWR – 14
tRFC – 110
tRRD – 6
tREFI – 955
tFAW – 30
RLT – 63
tWTP – 27
tRTP – 9
Write to read ( different dims ) - 6
Write to read ( different ranks ) – 6
B2B CAS Delay – Disable
Write to read ( same rank ) – 20
Read to Write (different dims ) – 10
Read to Write ( different rank ) – 10
Read to Write ( same rank ) – 10
Read to Read ( different dims ) – 7
Read to Read ( different rank ) – 6
Read to Read ( same rank ) - 4
Write to Write ( different dims ) – 7
Write to Write ( different rank ) – 7
Write to Write ( same rank ) – 4
Idle Cycle limit ( tRANKIDLE ) - 50

Finaly i manage stability on this settings.
I don't realy need tide settings , but i what to set up them manualy as spec.

Thank you , Lucian.

[GSKILL TECH]

I would suggest changing Performance Enhance to Standard. DRAM Timing Selectable - Expert
All else looks fine.

Thank you
GSKILL SUPPORT

[ropittbul]

Thank you for your 5 sec response.
I am very glad with every answer i get more and more.
Next time il will know what to aspect from the SUPPORT ! Aspecialy for 400$ memory kit .

Thank you ....

Enyone knows better then 0 ??