Asus psx58D premium and F3-16000CL9T-6GBTD

[outlaw]

I need some help fellas.Tryin to get stable overclock of 3.8 cant seem to get my memory running correctly. have it running at 1400mhz seems stable so far but any thing over that intel burn test fails! Here is my settings

i7 920 Do at 21x
blck 181
dram bus volt 1.64
qpi 1.40

Any ideas or any other values u need please let me know!

[outlaw]

Just wanted to give this a little bump! Also i did not ste this very clearly but at a 3.8 ghz overclock what im wanting is to run my meory at 1700 mhz, how high can the qpi go safely? Also will i have to increase the cpu voltage to run the memory that high? Sorry so many questions.

[GSKILL TECH]

CPU Voltage needs to be raised for the 3.8GHz overclock. Should be in the 1.35V range at that frequency. The QPI/VTT Voltage will be fine for 1.60V, but you should not need that much for DDR3-1700.

Thank you
GSKILL SUPPORT

[outlaw]

Ok ill give it a shot. Also just wanted to say thanks for the reply,and also this is a very informative forum keep up the good work!!