ASRock G41C-VS and G-Skill F3-10666 CL9-1GBNQ

[mk2power]

Hello,

I need help because my system is instable, reboot, and bad memory error...

I have cofigure my motherboard to accept DDR3 , I have put jumper FSB1 in right position.

I think the problem is that the motherboard recognize bad the memory.
She said that :

tCL: 7 (AUTO)
tRCD: 8 (AUTO)
tRP: 8 (AUTO)
tRAS: 20 (AUTO)
tRFC: 60 (AUTO)
tWR: 8 (AUTO)
tWTR: 4 (AUTO)
tRRD: 4 (AUTO)
tRTP: 4 (AUTO)

Dram Voltage : 1,71V (AUTO)

while the memory have CL 9-9-9-24

can you help me to adjuste the correct value

I think that I do that, but I'm not sure

tCL: 9
tRCD: 9
tRP: 9
tRAS: 24
tRFC: 60 (AUTO)
tWR: 8 (AUTO)
tWTR: 4 (AUTO)
tRRD: 4 (AUTO)
tRTP: 4 (AUTO)

I'm sorry for my bad English, and I hope to have answer

Bye

[GSKILL TECH]

That is correct, simply change the timings to what you have above. Also, memory voltage should be 1.60V.

Thank you
GSKILL SUPPORT

[mk2power]

Hi,

After more test, I have always same problem, much software can't start, windows say me that he can't found files.
But this problem disappear after one hour.
what do you think this kind of problem, the motherboard to be the cause ?

Thank you to help me

Bye