F3-12800CL7D-4GBRH and M4A79T (atikmdag)

[deejaya]

Motherboard: ASUS M4A79T Deluxe
Memory: F3-12800CL7D-4GBRH
CPU: Phenom II 965 C3

I have this setup running at the moment, using the same timings as advertised except tCL set to 8 instead of 7, at 1600MHz

Everything seems fine except 3dMark - it gives a TDR on atikmdag, even if i let the motherboard Auto the timings (which results in 1333MHz and slack timings)

Any tips from G.Skill regarding good settings to use?

Kind regards,

[deejaya]

After lots of messing about I removed one stick - no atikmdag errors, Vantage runs fine and anything else from Futuremark.

Confusing issue that no matter what settings, I cannot run 2 sticks of this F3-12800CL7D-4GBRH, but pop one stick in and everything is fantastic?

Would appreciate any input from GSKILL

[GSKILL TECH]

Very odd, send the memory in for new replacements. If you continue to have the same issue, you may need to get your CPU replaced.

Thank you
GSKILL SUPPORT

[deejaya]

Thanks for the response.

Can you confirm the settings for these 2 sticks on this motherboard? In case I have missed something!

[GSKILL TECH]

Memory Frequency DDR3-1600
Memory Timings tCL 8 - tRCD 8 - tRP 8 - tRAS 24 - Command Rate 2
Memory Voltage 1.60V

Thank you
GSKILL SUPPORT

[deejaya]

Big thanks to G.SKILL, both for the memory and the A1 support - 2 new DIMMS fixed it pretty well

[deejaya]

cant edit, but note:
8 7 7 7 27 1T

impressive DDR

[GSKILL TECH]

Should be quite fast! =)

Thank you
GSKILL SUPPORT