HOW do i OC my evga p55 classified to 2200

[enuffznuff21]

--------------------------------------------------------------------------------

My ram is G.SKILL PIS Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 2200 (PC3 17600) Desktop Memory Model F3-17600CL7D-4GBPIS - Retail

http://gskill.com/products.php?index=251

Motherboard: evga p55 classified 200

Cpu: i7 860

what do i need to put my BIOS settings in as to get the 2200 speeds, i bought the ram because it shows that the evga classified 200 board(p55) was one of the boards tested, if i could just grab the bios settings i would be good, THANKS! -ryan

I dont want xmp profile settings either, could you show in pics what to change, you had posted 3 pictures on my previous thread but they are not showing now, thanks

[GSKILL TECH]

Set BCLK to 184.
CPU Ratio - 16X
DRAM Frequency - 2208 (12X Multiplier)
DRAM Timings - tCL 7 - tRCD 10 - tRP 10 - tRAS 28 - Command Rate 2N
DRAM Voltage - 1.65V
IMC Voltage - 1.35V

Once that is complete everything should be fine.

Thank you
GSKILL SUPPORT

[enuffznuff21]

will setting my Bclk higher OC my processor? cuz i wanted to have it oc'd to 4.2 ghz, doing this will it OC my ram higher then what it might run or even lower?