Hi There!
Read many threads here to find out if my settings are correct but could not find something that is really for sure....
Main part ist that I have to set QPI/Vtt to 1,595 (!!!) to run the RAM stable. That seams to be very High. I dont want to burn my CPU...
Al other values are quite normal and are not the reason for my BlueScreens.... Testes this for many many hours and I found out that QPI/Vtt was the key...
Timings 9-9-9-24-1 (Tested also CR2, same behavior) - Al other Voltages as the Guide shows for this RAM on a GA-EX58....
So is this QPI/Vtt 1,595 safe?
Do I have a bad RAM?
Or do it depend on my CPU?
Looking forward to an answer...
DJM.
[EDIT]
Forget someting: I run the RAM as rated at 2000Mhz @ 1,64 V (BLK 200, Uncore Feq. 4000)
QPI/Vtt 1,555: System Boot - but unstable right after entering the system
QPI/Vtt 1,575: System "looks like" stable but reboot after ca. 1 hour Prime95 Blend Test
QPI/Vtt 1,595: System stable - 14 hours Prime95 Blend Test (stopped it manually then)
Read many threads here to find out if my settings are correct but could not find something that is really for sure....
Main part ist that I have to set QPI/Vtt to 1,595 (!!!) to run the RAM stable. That seams to be very High. I dont want to burn my CPU...
Al other values are quite normal and are not the reason for my BlueScreens.... Testes this for many many hours and I found out that QPI/Vtt was the key...
Timings 9-9-9-24-1 (Tested also CR2, same behavior) - Al other Voltages as the Guide shows for this RAM on a GA-EX58....
So is this QPI/Vtt 1,595 safe?
Do I have a bad RAM?
Or do it depend on my CPU?
Looking forward to an answer...
DJM.
[EDIT]
Forget someting: I run the RAM as rated at 2000Mhz @ 1,64 V (BLK 200, Uncore Feq. 4000)
QPI/Vtt 1,555: System Boot - but unstable right after entering the system
QPI/Vtt 1,575: System "looks like" stable but reboot after ca. 1 hour Prime95 Blend Test
QPI/Vtt 1,595: System stable - 14 hours Prime95 Blend Test (stopped it manually then)
Comment