Asus p7p55d le + f3-12800cl8d-4gbrm

[julienperret]

Hi,

I have problem with :

I7 860
asus p7p55d le
2x f3-12800cl7d-4gbrm

Could you please give me settings ?
I have upgraded my bios with lastest release 1102

But I still have issues

Only 4 on 8 go visible in bios
In Windows 7 x64, I see 8 go installed, 4 go usable

I've tried with 2go
same thing only 1 in bios

I would like to know what you think about it before change ram kits

kind regards

[G.SKILL]

did you try one stick at one time?
and please try to run all default setting to see if memory is defective
thanks


G.S

[julienperret]

Hello

yes I've tried one by one
bios always see 1 go when I put 2

strange

bye

[G.SKILL]

could you post out cpu-z screenshot of spd tab?
we'd like to check if the spd value is correct
thanks


G.S

[julienperret]

Hi again

Thanks for your anwers

For CPUz :



If you need something else, tell me

Kind regards

[julienperret]

Tab error

[GSKILL TECH]

Try reseating the memory and make sure they are firmly inserted. Sometimes they are not fully installed so all 4 sticks will not be recognized.

Thank you
GSKILL SUPPORT

[julienperret]

Hello,

I've tried lot of times to check/test/put ram Kits

Same thing one by one, so I think it's not plugs

In windows I see

Installed 8g (4 Usable)... ... ...

Have you some settings for optimal use ?
In CPUz I see that voltage must be 1.65
But I just can increase 0.1 by 0.1 so 1.6 or 1.7v
What is the best value ?

Thanks a lot

Kind regards

[G.SKILL]

by checking with CPU-Z, at least the SPD for the memory is correct
there are 8GB memory shown in CPU-Z, which means 8GB memory are installed on your motherboard
could you show us the task manager with performance tab?
thanks


G.S

[julienperret]

So...



And



Kind regards

[G.SKILL]

please check if there is "REMAP" option in BIOS and enable it
then the problem should be solved
thanks


G.S

[julienperret]

It was already activated in Bios

Asus just released a new bios version

I upgrade and I still have the problem

Any idea ?


Kind regards

[GSKILL TECH]

Enable the XMP Profile and everything should be set properly in BIOS. If you continue to have an issue, you may need to exchange your motherboard. Keep us posted on the results.

Thank you
GSKILL SUPPORT

[G.SKILL]

here is the same combination tested by us:




G.S

[julienperret]

Hello,

I've checked in my bios settings

I've found the XMP, I've activated it with profile 1
I have not profile 2 (memory manufacturer settings...)

I can't have access to your tested configuration, bad link ?

Kind regards