New Build

[Middy]

After removing stick from slot 3 it would not boot up wouldn't even turn monitor on no post.
so swaped sticks now booting and running memtest must be faulty stick even though they were sent back and tested.
I am in New Zealand who is the importer here maybe we should talk to them.

I had posted 7 photos of screen shots can not find anymore of the BIOS re processer settings

Cheers
Wayne

[Middy]

Have added photo 1 which you could see dont know why it was there for me
Cheers
Waynehttp://www.flickr.com/photos/43589137@N08/?saved=1

[Middy]

With the single stick in slot 1 I get 1000's of errors with mentest will try it in slot 2
cheers
Wayne
PS you should be able to see CPU settings in BIOS photo 1 now

[GSKILL TECH]

Try slot 3 when using one single stick.

Thank you
GSKILL SUPPORT

[Middy]

Will do
Thanks
Wayne

[Middy]

In slot 3 we are still getting errors with memtest, I have had it error free with just on stick before, should i go back to those setting and report back? I am thinking i could load fail safe default or maybe the ram is faulty just not tested properly when sent back.
Cheers
Wayne

[GSKILL TECH]

Use these settings to test one stick individually in slot 3, I think some of the settings were wrong:

Robust Graphics Booster............ [Auto]
CPU Clock Ratio........................ [ 8X ]
Fine CPU Clock Ratio................. [+0.5]

CPU Host Clock Control.............. [Enabled]
CPU Host Frequency (Mhz)......... [ 400]
PCI Express Frequency (Mhz)...... [ 100]
C.I.A.2.................................... [Disabled]

Performance Enhance................ [Standard]
Extreme Memory Profile (X.M.P.).. [Auto]
(G)MCH Frequency Latch............ [Auto]
System Memory Multiplier (SPD)... [4.00D]
Memory Frequency (Mhz)... 1066... 1600
DRAM Timing Selectable (SPD)..... [Manual]

CAS Latency Time............ 9...... [ 9 ]
tRCD.............................. 9...... [ 9 ]
tRP................................ 9...... [ 9 ]
tRAS............................ 24...... [ 27 ]

Load Line Calibration................. [Disabled]
CPU Vcore............. 1.18750V.... [1.30V]
CPU Termination.... 1.200V........ [AUTO]
CPU PLL................ 1.500V........ [1.60V]
CPU Reference...... 0.760V........ [AUTO]

MCH Core................... 1.100V... [1.200V]
MCH Reference............ 0.760V... [Auto]
MCH/DRAM Reference... 0.900V... [Auto]
ICH I/O...................... 1.500V... [Auto]
ICH Core.................... 1.100V... [Auto]

DRAM Voltage............. 1.500V... [1.6500V]
DRAM Termination....... 0.900V... [Auto]
Channel A Reference... 0.900V... [Auto]
Channel B Reference... 0.900V... [Auto]

Thank you
GSKILL SUPPORT

[Middy]

System Memory Multiplier (SPD)... [2.66D] Have set to 2.4 next one up 2.8

DRAM Voltage............. 1.800V... [2.100V] Mine reads 1.500 not 1.800 have set to 1.800 as 2.100 is in a different colour indicating danger?
Still comming up with errors with memtest
Cheers
Wayne

[GSKILL TECH]

Sorry about that, gave you the wrong settings, please enter the following settings:

Robust Graphics Booster............ [Auto]
CPU Clock Ratio........................ [ 8X ]
Fine CPU Clock Ratio................. [+0.5]

CPU Host Clock Control.............. [Enabled]
CPU Host Frequency (Mhz)......... [ 400]
PCI Express Frequency (Mhz)...... [ 100]
C.I.A.2.................................... [Disabled]

Performance Enhance................ [Standard]
Extreme Memory Profile (X.M.P.).. [Auto]
(G)MCH Frequency Latch............ [Auto]
System Memory Multiplier (SPD)... [4.00D]
Memory Frequency (Mhz)... 1066... 1600
DRAM Timing Selectable (SPD)..... [Manual]

CAS Latency Time............ 9...... [ 9 ]
tRCD.............................. 9...... [ 9 ]
tRP................................ 9...... [ 9 ]
tRAS............................ 24...... [ 27 ]

Load Line Calibration................. [Disabled]
CPU Vcore............. 1.18750V.... [1.30V]
CPU Termination.... 1.200V........ [AUTO]
CPU PLL................ 1.500V........ [1.60V]
CPU Reference...... 0.760V........ [AUTO]

MCH Core................... 1.100V... [1.200V]
MCH Reference............ 0.760V... [Auto]
MCH/DRAM Reference... 0.900V... [Auto]
ICH I/O...................... 1.500V... [Auto]
ICH Core.................... 1.100V... [Auto]

DRAM Voltage............. 1.500V... [1.6500V]
DRAM Termination....... 0.900V... [Auto]
Channel A Reference... 0.900V... [Auto]
Channel B Reference... 0.900V... [Auto]

Thank you
GSKILL SUPPORT

[Middy]

Have set BIOS as above, have one stick in slot 3 when runnig memtest runs for 8mins 16 sec then has 5 errors at 8mins 42 sec we have thousands of errors going past 100,000.

If i change memory to the other stick in slot 3 pc wont even boot up doesn't even post so the memory stick must be faulty, could the other stick be faulty as well?
Cheers
Wayne

[GSKILL TECH]

Try slot 1 and 2 with those exact settings to see if you can replicate similar results. Sounds like you have one bad stick, but just want to make sure it's not motherboard too.

Thank you
GSKILL SUPPORT

[Middy]

Same results in all slots.
Cheers
Wayne

[GSKILL TECH]

Try a new set of memory, if you continue to have issues, you may need to replace the motherboard.

If you could post BIOS screen shots I can make sure you have everything set correctly.

Thank you
GSKILL SUPPORT

[Middy]

Here is the screen shot as requested
Cheers
Wayne
http://www.flickr.com/photos/43589137@N08/

[GSKILL TECH]

CMD 2, but as as everything else it looks good. You may just have a bad set.

Thank you
GSKILL SUPPORT