Asus P9X79-E WS F3-19200CL10Q2-64GBZHD Question

[otta56]

Hello,

I cannot get this memory kit to run stabily at 2400 Mhz. I usually get a Windows 8.1 error part way through the OS boot that results in a BSOD. BIOS post is fine. Using a 4930x at 4.2 Ghz. Following recommended voltages for memory and cpu as per the Intel setup guide. The memory is stable at 2133 Mhz. Has Gskill tested this board for for the maximum speed it can support?

Thank you

[GSKILL TECH]

There are only a select few motherboards that are 100% tested for this RAM kit. The list can be found here under QVL:

http://www.gskill.com/en/product/f3-19200cl10q2-64gbzhd

You can test one module at a time to see if they all pass properly.

Thank you
GSKILL TECH