ASUS F2A85-M/SCM motherboard
RipjawsX F3-14900CL9D-8GBXL; DDR3-1866-CL9-10-9-28; Running at 1866MHz
AMD A10-6800K processor
The memory and motherboard are both specified on your web site and the Asus manual.
My problem is that when I turn on the system (cold) the motherboard RAM LED turns on (which is good), but after 5 seconds it blinks off then on again for a minute (bad), then goes off and boots normally (good). Normally, the REM LED should come on for about 5 seconds then go off and the system boots normally.
I’ve reseated them a number of times and get them to click properly in place. I’ve run Memtest86+ v5.01 and haven’t seen a single error. Also, when the system is warmed up I don’t see any problem.
I built three identical computers, and I only see this behavior in computer #3. When I swapped the RAM in computer #2 and #3 the problem moved to computer #2 and computer #3 worked fine. I then swapped the memory again and computer #2 worked fine and #3 had the problem again.
RipjawsX F3-14900CL9D-8GBXL; DDR3-1866-CL9-10-9-28; Running at 1866MHz
AMD A10-6800K processor
The memory and motherboard are both specified on your web site and the Asus manual.
My problem is that when I turn on the system (cold) the motherboard RAM LED turns on (which is good), but after 5 seconds it blinks off then on again for a minute (bad), then goes off and boots normally (good). Normally, the REM LED should come on for about 5 seconds then go off and the system boots normally.
I’ve reseated them a number of times and get them to click properly in place. I’ve run Memtest86+ v5.01 and haven’t seen a single error. Also, when the system is warmed up I don’t see any problem.
I built three identical computers, and I only see this behavior in computer #3. When I swapped the RAM in computer #2 and #3 the problem moved to computer #2 and computer #3 worked fine. I then swapped the memory again and computer #2 worked fine and #3 had the problem again.
Comment