RipJaws Z 32GB kit only 50% registering in BIOS Memory Detection

[SVT_Fox]

I have the F3-2133C11Q-32GZL 32GB kit

ASUS P8Z77 V Pro motherboard

i7 2600K CPU

Yes I have looked at the older QVL list of ram supported, my ram is not on the list. however I have updated to the newest BIOS update, nothing changed

no over clocking at all, nothing

CPU Z can definitely see all 4 sticks at 32GB total, however BIOS and Windows does not.

SLOTS 1/3 work at 16GB

slots 2/4 will not work.

all pins are un damaged.

all ram has been used and no sticks seem to be dead.

Im thinking a slightly bent CPU pin, or a dead CPU pin

This should be working fine and I want to overclock it to 2133MHZs

[emissary42]

Clean the dimm slots and memory contacts. Maybe raise vdimm a little bit, that could help with some type of ICs.

If you only install two sticks in 2+4, does the board POST and boot into windows with 16gb?

[SVT_Fox]

Yes 2-4 boot fine into windows with 16GB

everything is clean

[SVT_Fox]

anyone else?

[supahos]

Probably a silly question but what version of windows do you have? Win 7 home only supports 16 gb,

[GSKILL TECH]

Any 2 modules will work fine in either set of slots but when all 4 modules together they will not?

Thank you
GSKILL TECH