Q9550 2.83 ghz UD3R rev1.1 F12 bios
Moved sticks to slots2,4 Even though I have the F12 BIOS
Ran Memtest 4.0 for 3hrs.39min. no errors
And 20+20 intel burn tests no errors.Seems like I have been here before and it failed memtest in 2hours, except sticks were in1,3 slots and I think I had xmp on auto.
Wonder about tightening timings maybe, since mem is only running at 912?
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...[AUTO]
CPU Clock Ratio ...........8X
Fine CPU Clock Ratio.......+0.5
CPU Frequency .............3.23 ghz (380x8.5)
Clock Chip Control
>>>Standard Clock Control
CPU Host Clock Control.......[Enabled]
CPU Host Frequency (Mhz) ....380
PCI Express Frequency (Mhz)..AUTO
C.I.A.2 .....................[Disabled]
Advanced Clock Control [Press Enter]
DRAM Performance Control
Performance Enhance..............[STANDARD]
Extreme Memory Profile (X.M.P.)..[Disabled]
(G)MCH Frequency Latch...........[Auto]
System Memory Multiplier ........[2.40B]
Memory Frequency (Mhz) ..........1066 912
DRAM Timing Selectable ..........[Manual]
Standard Timing Control
CAS Latency Time...5 [5]
tRCD ..............7 [5]
tRP'...............7 [5]
tRAS...............20 [15]
Advanced Timing Control
tRRD...............4 [AUTO]
tWTR...............4 [AUTO]
tWR................8 [AUTO]
tRFC...............68 [60]
tRTP...............4 [AUTO]
Command Rate (CMD).0 [2]
Motherboard Voltage Control
Voltage Type
>>> CPU
Load-Line Calibration [DISABLED]
CPU Vcore...............1.3000v..[1.28125v..]
CPU Termination?........1.200v....[AUTO]
CPU PLL????.............1.500v....[AUTO]
CPU Referen............:0.760v....[AUTO]
>>>MCH/ICH
MCH Core.........1.100v...[AUTO]
MCH Reference....0.760v...[AUTO]
MCH/DRAM Ref.....0.900v...[AUTO]
ICH I/O..........1.500v...[AUTO]
ICH Core.........1.100v...[AUTO]
>>> DRAM
DRAM Voltage ........1.800v...[2.100v]
DRAM Termination.....0.900v...[AUTO]
Channel A Reference..0.900v...[AUTO]
Channel B Reference..0.900v...[AUTO]
Moved sticks to slots2,4 Even though I have the F12 BIOS
Ran Memtest 4.0 for 3hrs.39min. no errors
And 20+20 intel burn tests no errors.Seems like I have been here before and it failed memtest in 2hours, except sticks were in1,3 slots and I think I had xmp on auto.
Wonder about tightening timings maybe, since mem is only running at 912?
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...[AUTO]
CPU Clock Ratio ...........8X
Fine CPU Clock Ratio.......+0.5
CPU Frequency .............3.23 ghz (380x8.5)
Clock Chip Control
>>>Standard Clock Control
CPU Host Clock Control.......[Enabled]
CPU Host Frequency (Mhz) ....380
PCI Express Frequency (Mhz)..AUTO
C.I.A.2 .....................[Disabled]
Advanced Clock Control [Press Enter]
DRAM Performance Control
Performance Enhance..............[STANDARD]
Extreme Memory Profile (X.M.P.)..[Disabled]
(G)MCH Frequency Latch...........[Auto]
System Memory Multiplier ........[2.40B]
Memory Frequency (Mhz) ..........1066 912
DRAM Timing Selectable ..........[Manual]
Standard Timing Control
CAS Latency Time...5 [5]
tRCD ..............7 [5]
tRP'...............7 [5]
tRAS...............20 [15]
Advanced Timing Control
tRRD...............4 [AUTO]
tWTR...............4 [AUTO]
tWR................8 [AUTO]
tRFC...............68 [60]
tRTP...............4 [AUTO]
Command Rate (CMD).0 [2]
Motherboard Voltage Control
Voltage Type
>>> CPU
Load-Line Calibration [DISABLED]
CPU Vcore...............1.3000v..[1.28125v..]
CPU Termination?........1.200v....[AUTO]
CPU PLL????.............1.500v....[AUTO]
CPU Referen............:0.760v....[AUTO]
>>>MCH/ICH
MCH Core.........1.100v...[AUTO]
MCH Reference....0.760v...[AUTO]
MCH/DRAM Ref.....0.900v...[AUTO]
ICH I/O..........1.500v...[AUTO]
ICH Core.........1.100v...[AUTO]
>>> DRAM
DRAM Voltage ........1.800v...[2.100v]
DRAM Termination.....0.900v...[AUTO]
Channel A Reference..0.900v...[AUTO]
Channel B Reference..0.900v...[AUTO]
Comment