PC8800 PI series fsb strap problem

[woNd3R]

Motherboard : Rampage Formula
CPU : Q6600
RAM : PC8800 PI series


My problem is that i can't get a boot if i i have an fsb strap higher than 266 and ram speed higher than 1000 mhz

With 266 fsb strap i can also have a slight oc like 1128, with 333 i have to be on 960 in order to boot. Stock values, overclock values doesn't matter at all.


Bios settings
CPU Ratio 0.8
Fsb Strap to NB 333
Fsb Freq 450
PCIE freq 101

Dram 1081mhz (no boot) - 901mhz (boots)

Memory settings auto
CPU Voltage 1.4625
CPU PPL volt 1.5
NB Voltage 1.37
DRAM Voltage 1.9
FSB termination 1.075
SB 1.5 V 1.50
Loadline Calibration Enabled
CPU Spread Spectrum Disabled
PCIE Spread Spectrum Disabled
C1E support Disabled
CPU TM Function Disabled
Max Cpuid Value Limit Disabled


Everything else is on auto

Bios version 1001

[woNd3R]

Any ideas?

Modules are gone?

Should i start Rma process?

[woNd3R]

Also i ve tried on a different motherboard an ASus P5E same settings wasn't able to boot

I ve tried also what used to be my daily config and it doesn't work on both mainboards.

Cpu Ratio 0.7
Fsb Strap 333
FSB freq 460
Dram Freq 1105 Mhz

NB 1.33V
Dram 1.90V

[woNd3R]

Managed to boot in daily with 1 stick


Run Mem test (test 7 )for 45 minutes without any errors


Tried the second one had 123 errors in 10 seconds

Guess i have to RMA -_-

[GSKILL TECH]

http://www.gskill.com/rma.php

Thank you
GSKILL TECH