I'm having problems with running those RAMs on my mobo (RAM are on DFI list, DFI is on G.SKILL list), they don't want to run on stock settings 1066/5-5-5-15/2.1V, SPD starts them with 800/5-5-5-15 and sticks works fine, but when i set 266/1066 mobo gives C1 error. Settings I've tried:
RAM V - 2.1V
266/1066 (E7500 11x266)
NB V - 1.32V
CPU VTT - 1.21V
5-5-5-15 tRFC 54
I've found half-stable settings that are:
RAM V - 2.22V
333/1066 (E7500 10x333)
NB V - 1.32V
CPU VTT - 1.23V
5-5-5-15 tRFC 54
But I'm not satisfied since RAM needs much more voltage than promised 2.0-2.1V and it's half stable cause sometimes mobo doesn't want to boot showing C1 error.
C2D E7500 11x266
Tagan U15 480W
DFI DK P45-T2RS BIOS 14.09.2009 (latest)
I think it's mobos fault, seems to hate 266/1066 and 333/1066 settings :/
RAM V - 2.1V
266/1066 (E7500 11x266)
NB V - 1.32V
CPU VTT - 1.21V
5-5-5-15 tRFC 54
I've found half-stable settings that are:
RAM V - 2.22V
333/1066 (E7500 10x333)
NB V - 1.32V
CPU VTT - 1.23V
5-5-5-15 tRFC 54
But I'm not satisfied since RAM needs much more voltage than promised 2.0-2.1V and it's half stable cause sometimes mobo doesn't want to boot showing C1 error.
C2D E7500 11x266
Tagan U15 480W
DFI DK P45-T2RS BIOS 14.09.2009 (latest)
I think it's mobos fault, seems to hate 266/1066 and 333/1066 settings :/
Comment