Best Bios configuration for F2-8500CL5D-4GBPI-B with GA-MA790GP-UD4H

[Blademint]

I'm using ...
Phenom II X4 940
Gigabyte GA-MA790GP-UD4H with Bios F7b
F2-8500CL5D-4GBPI-B

Could you please tell me the best bios configuration for my system like this one?
http://gskill.us/forum/showthread.php?t=1129

Sorry for my english, I'm Thai

[GSKILL TECH]

Your settings will be basically the same.

System Memory Multiplier - x5.33 DDR2-1066

CAS# latency - 5T
RAS to CAS R/W Delay - 5T
Row Precharge Time - 5T
Minimum RAS Active Time - 15T
1T/2T Command Timing - 2T
TwTr Command Delay - 4T
Trfc0 for DIMM1 - 127ns
Trfc2 for DIMM2 - 127ns

Increase DDR2 Voltage to +0.300V
CPU NB VID Control +0.025V

Thank you
GSKILL TECH

[Blademint]

Thank you very much for your reply

Thank you very much for your reply

I would like to know which one is better between (Setting the memory timing manually or just enable the EPP Mode and EPP Voltage Control)?

[GSKILL TECH]

Always manually set it, that's what we suggest.

Thank you
GSKILL TECH

[Blademint]

According to my pictures, Did I setup everything correctly?

[GSKILL TECH]

Yes, spot on to me. =)

Thank you
GSKILL TECH

[Blademint]

Thank you

Thank you very much for your help.
One more question,If I set everything as your suggestion, Will it reduce my PC's life cycle?
and am I overclocking?

[GSKILL TECH]

No, it will not reduce your PC's life cycle. The voltages are fairly low, so it is normal for the hardware. You are not overclocking, although the memory package you purchased can be.

Thank you
GSKILL TECH

[L4d]

@ OP:
Have you tested your set-up with Memtest86+?