Hi,
I have recently bought 2GB of your 1066 DDR2 memory. Before that I had 800Mhz DDR2 that ran without any issues. Now, my system is very unstable, it will boot but crashes very often (freezes in Windows XP, terminates programs, blue screen). This is my system configuration:
ASUS M2N32-SLI motherboard with latest bios 2101
AMD Phenom 9850 running 2.5 Ghz, not overclocked
Windows XP SP3
I have set voltage at 2.1v, and timings at 5-5-5-15 2T
CPU to NB HT voltage 1.40v
NB to SB HT voltage +1.40v
AI clock skew - AUTO
There are many settings under advanced DDR setting, they are all set to AUTO (trc, twr, trrd, trwt, twtr, trtp, twrrd, twrwr, trdrd, tref, trfc, dram termination, dynamic idle cycle counter, idle cycle limit, dcq bypass maximum, dram burst lenght, dram bank interleaving, bank swizzle mode)
I also have some options under DRAM Timing control (all set to AUTO) and Output Driver Control (also all set to AUTO)
Please let me know ho to set the memory correcly so that system can be stable.
I have recently bought 2GB of your 1066 DDR2 memory. Before that I had 800Mhz DDR2 that ran without any issues. Now, my system is very unstable, it will boot but crashes very often (freezes in Windows XP, terminates programs, blue screen). This is my system configuration:
ASUS M2N32-SLI motherboard with latest bios 2101
AMD Phenom 9850 running 2.5 Ghz, not overclocked
Windows XP SP3
I have set voltage at 2.1v, and timings at 5-5-5-15 2T
CPU to NB HT voltage 1.40v
NB to SB HT voltage +1.40v
AI clock skew - AUTO
There are many settings under advanced DDR setting, they are all set to AUTO (trc, twr, trrd, trwt, twtr, trtp, twrrd, twrwr, trdrd, tref, trfc, dram termination, dynamic idle cycle counter, idle cycle limit, dcq bypass maximum, dram burst lenght, dram bank interleaving, bank swizzle mode)
I also have some options under DRAM Timing control (all set to AUTO) and Output Driver Control (also all set to AUTO)
Please let me know ho to set the memory correcly so that system can be stable.
Comment