Tweet
F2-6400CL5D-2GBNQ x 2 ddr2-890 5-5-5-15-43
Pentium EE 965 4266 MHz Asus P5WD2 Premium i955X Dual DDR2-890 5-5-5-15 70.5 ns
I cant seem to get the pc to boot when I try to run this set up @ 1066, am I pushing the limits of this ram,or do you think it is the motherboard limitation?
Also when running the Everest memory copy bench,the memory fsb shows as follows:
Pentium EE 965 4266 MHz Asus P5WD2 Premium i955X Dual DDR2-1187 5-5-5-15 6397 MB/s
I was running it at 4-4-4-10 @ 800, but seem to get better latency benches with the 890 fsb @445 memory bus. CPU overclocked 4.27ghz (267.1x16 multiplier)Have changed multiplier,not the fsb. Memory volt is set at 2.10v. Played COD4 for a couple our and feels very stable, can I tighten the timings a bit? I read many of the previous post and increased the MCH to 1.4 volts. This allowed the above posted settings to boot,and seem to be very stable in the Everest stress test.
Basicaly trying to tune these 4 gb sticks to the max til I replace with some of your ddr2-8500 2x2gb sticks.
Any thoughts or ideas are greatly appreciated, I going to download one of the screen capture programs and I will post some of the Everest and CPUZid stats.
Frank in Alabama
Pentium EE 965 4266 MHz Asus P5WD2 Premium i955X Dual DDR2-890 5-5-5-15 70.5 ns
I cant seem to get the pc to boot when I try to run this set up @ 1066, am I pushing the limits of this ram,or do you think it is the motherboard limitation?
Also when running the Everest memory copy bench,the memory fsb shows as follows:
Pentium EE 965 4266 MHz Asus P5WD2 Premium i955X Dual DDR2-1187 5-5-5-15 6397 MB/s
I was running it at 4-4-4-10 @ 800, but seem to get better latency benches with the 890 fsb @445 memory bus. CPU overclocked 4.27ghz (267.1x16 multiplier)Have changed multiplier,not the fsb. Memory volt is set at 2.10v. Played COD4 for a couple our and feels very stable, can I tighten the timings a bit? I read many of the previous post and increased the MCH to 1.4 volts. This allowed the above posted settings to boot,and seem to be very stable in the Everest stress test.
Basicaly trying to tune these 4 gb sticks to the max til I replace with some of your ddr2-8500 2x2gb sticks.
Any thoughts or ideas are greatly appreciated, I going to download one of the screen capture programs and I will post some of the Everest and CPUZid stats.
Frank in Alabama
). Anway, tRAS won't hurt yu on benchs also if you got there 'tRTP' 'Read to Precharge' dump that as high as it goes 15T's good dump you extra ~100MB/s on all benches.
Comment