If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
5-5-5-15 are the timings for 1066 2v (or 2.1v if a tad unstable, can bump a bit more if neccesary)
This kit only has 2 sticks in it, if you're using 4 (aka 2 packs) that could cause an issue as unmatched sets aren't guaranteed to work together. Make sure if you can tell which are pairs to use the pairs on the same channel(same colored slots, not beside eachother), also using 4 sticks may put a little stress on your memory controller, you may need to bump its voltage some as well.
Is working with the settings you suggested! Stable, just not as quick as I thought.
USED RAM to DDR2-800, timings tCL 4 - tRCD 4 - tRP 4 - tRAS 12, DRAM Voltage 2.0V
Last edited by pemiscot; 09-27-2013, 06:08 AM.
Reason: clarification
Your setup isn't "new car fast" but should still be a decent rig. I wonder how old your hard drive is? That seems to be the Slowest thing in most computers anymore.
Comment