My current build:
- Ryzen 1700X CPU
- Asus ROG Crosshair VI Hero MB (BIOS 1002)
- GSkill Flare-X 16GB (2x8GB) 288-Pin DDR4 F4-3200C14D-16GFX
- NZXT Kraken x62 AIO
So I picked these beauties up from NewEgg (https://www.newegg.com/Product/Produ...82E16820232530) and downloaded the latest BIOS from Asus.
I was able to successfully get the RAM to post at 2933 but could not get it up to 3200. I did not have to use DOCP settings to get it to post at 2933.
When I try to push the RAM to hit 3200 I get a 0d error code from the MB. I tried upping the DRAM voltage to 1.4 and it does not post. I attempted to up the SOC voltage to 1.2 (highest safe setting) and it cycles for two minutes and finally posts, but DRAM is set to 2400.
Both sticks are in A2+B2 slot configuration on the MB. I'm starting to run out of options. Should I RMA these sticks or wait untial another BIOS update comes out from ASUS which I hear is going to address memory stability at higher settings?
- Ryzen 1700X CPU
- Asus ROG Crosshair VI Hero MB (BIOS 1002)
- GSkill Flare-X 16GB (2x8GB) 288-Pin DDR4 F4-3200C14D-16GFX
- NZXT Kraken x62 AIO
So I picked these beauties up from NewEgg (https://www.newegg.com/Product/Produ...82E16820232530) and downloaded the latest BIOS from Asus.
I was able to successfully get the RAM to post at 2933 but could not get it up to 3200. I did not have to use DOCP settings to get it to post at 2933.
When I try to push the RAM to hit 3200 I get a 0d error code from the MB. I tried upping the DRAM voltage to 1.4 and it does not post. I attempted to up the SOC voltage to 1.2 (highest safe setting) and it cycles for two minutes and finally posts, but DRAM is set to 2400.
Both sticks are in A2+B2 slot configuration on the MB. I'm starting to run out of options. Should I RMA these sticks or wait untial another BIOS update comes out from ASUS which I hear is going to address memory stability at higher settings?
Comment