No announcement yet.

Timing for F4-3466C16D-16GTZR

  • Filter
  • Time
  • Show
Clear All
new posts

  • Timing for F4-3466C16D-16GTZR


    I was trying to overclock F4-3466C16D-16GTZR 16-18-18-38 kit to 4000mhz with 1.38v and VCC/VSA 1.225
    m using 9700k@ 5Ghz 1.29v and my motherboard is Asus XI gene

    I tested for 2 hr with memtest x64, found no problem on the ram setting(I changed to 17-18-18-38)
    But then I used Prime95 blend torture test, there is rounding error.(I passed the small Ftt test)
    Rounding error may caused by wrong timing i guess?
    Should I increase the vcore for the cpu / change the timing on ram ?


  • #2
    I would check higher SA voltage. This motherboard will suggest you 1.3V or something near. Also check 4000 19-19-19 1.35V 2N first. When you make it work stable then try 18-18-18 and next 17-17-17.
    Memtest86/+ is not stressing memory controller enough so it may pass but when you load memory in ~90% in multi-threaded environment then it may show errors which are not always memory errors.
    Typically I'm using AIDA64 stability test. Enabled only memory and cache tests. It gives ~97% memory load and full IMC load. There are some other tests which are good too.


    • #3
      I think it's stable now, i changed to 18-18-18-38 1.35 trfc 440
      SA 1.3
      and tested with AIDA64 for 30mins
      Thank you