Hi all. I need some help to oc my new ram http://www.gskill.com/en/product/f3-12800cl9t-12gbsr2
mobo is gigabyte ex58 ud5 and cpu is i7 920
till now i am running these settings and its stable
CPU Clock Ratio ................................ [19x] 3.8 (200x19)
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Enabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]
Virtualization Technology ................... [Disabled]
Uncore & QPI Features:
QPI Link Speed .............................. [7.2 GHz] (x36 clock Ratio)
Uncore Frequency .......................... [3200 MHz] ( x16 Uncore Clock Ratio)
Isonchronous Frequency .................. [Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... [200]
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive .............................. [800 mV]
PCI Express Clock Drive ................... [900 mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (x.m.p.) ......[Disable]
System Memory Multiplier (SPD) ........ [x8]
DRAM Timing Selectable (SPD) .......... [Quick]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... [ 8 ]
tRCD ....................................... [ 9 ]
tRP ......................................... [ 8 ]
tRAS ....................................... [24]
Command Rate (CMD) ........... [ 2 ]
Memory Frequency ............... [1600 MHz]
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Enabled]
CPU Vcore ....................1.23125v [Normal]
Dynamic Vcore(DVID)..+0.00000V [ -0.03125V]
QPI/VTT Voltage ..................... [1.280V]
CPU PLL .................................. [1.800V]
MCH/ICH
PCIE 1.500v ........................... [Auto]
QPI PLL 1.100v ....................... [Auto]
IOH Core 1.100v ..................... [1.24V]
ICH I/O 1.500v ....................... [Auto]
ICH Core 1.1v ........................ [Auto]
DRAM
DRAM Voltage........................ 1.400v
All other settings [AUTO]
At first when i used Extreme Memory Profile (x.m.p.) ......[profile 1] my ocz ssd vertex failed to operate. after calc memory the ahci controller gave me that message : smart command failed.
i think its because of the low ram voltage of the ram (1.25) . what do you think? The lowest setting for memory volts is 1.3 which i don't think i can use it because my ssd fails.
1st) i want to ask if it's safe to run those g.skill (1.25v) at 1.4v
2nd) any imrovements i can make?
mobo is gigabyte ex58 ud5 and cpu is i7 920
till now i am running these settings and its stable
CPU Clock Ratio ................................ [19x] 3.8 (200x19)
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Enabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]
Virtualization Technology ................... [Disabled]
Uncore & QPI Features:
QPI Link Speed .............................. [7.2 GHz] (x36 clock Ratio)
Uncore Frequency .......................... [3200 MHz] ( x16 Uncore Clock Ratio)
Isonchronous Frequency .................. [Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... [200]
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive .............................. [800 mV]
PCI Express Clock Drive ................... [900 mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (x.m.p.) ......[Disable]
System Memory Multiplier (SPD) ........ [x8]
DRAM Timing Selectable (SPD) .......... [Quick]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... [ 8 ]
tRCD ....................................... [ 9 ]
tRP ......................................... [ 8 ]
tRAS ....................................... [24]
Command Rate (CMD) ........... [ 2 ]
Memory Frequency ............... [1600 MHz]
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Enabled]
CPU Vcore ....................1.23125v [Normal]
Dynamic Vcore(DVID)..+0.00000V [ -0.03125V]
QPI/VTT Voltage ..................... [1.280V]
CPU PLL .................................. [1.800V]
MCH/ICH
PCIE 1.500v ........................... [Auto]
QPI PLL 1.100v ....................... [Auto]
IOH Core 1.100v ..................... [1.24V]
ICH I/O 1.500v ....................... [Auto]
ICH Core 1.1v ........................ [Auto]
DRAM
DRAM Voltage........................ 1.400v
All other settings [AUTO]
At first when i used Extreme Memory Profile (x.m.p.) ......[profile 1] my ocz ssd vertex failed to operate. after calc memory the ahci controller gave me that message : smart command failed.
i think its because of the low ram voltage of the ram (1.25) . what do you think? The lowest setting for memory volts is 1.3 which i don't think i can use it because my ssd fails.
1st) i want to ask if it's safe to run those g.skill (1.25v) at 1.4v
2nd) any imrovements i can make?
Comment