Looking for some help with the BIOS settings for this combination. I bought the ripjawsz kit after doing some reading on whether this quad channel stick would work in my dual channel board. It seemed to be confirmed that it would.
So I fitted it yesterday and after about 20 minutes I had my first of many BSODs.
Initially I thought it was a driver issue because when I refitted my USB cables and powered the box back on I got 4 driver upgrade messages including one for the intellimouse.
However after a few changes I decided to try a fresh build using a spare Samsung F3 I had. First time it hung trying to copy the files from the install CD, second time it blue screened just after it formatted the disk. So i put the old memory back and hey stability. My PC has the following set-up:
i7 860 (1156)
Gigabyte P55M-UD4 (BIOS Rev 11)
ATi Radeon HD 4870 (1GB)
Corsair TX 650W
I've read a few things here and the opinion seems to be I need to up the voltage.
Do I need to do anything else?
Any help appreciated.
So I fitted it yesterday and after about 20 minutes I had my first of many BSODs.
Initially I thought it was a driver issue because when I refitted my USB cables and powered the box back on I got 4 driver upgrade messages including one for the intellimouse.
However after a few changes I decided to try a fresh build using a spare Samsung F3 I had. First time it hung trying to copy the files from the install CD, second time it blue screened just after it formatted the disk. So i put the old memory back and hey stability. My PC has the following set-up:
i7 860 (1156)
Gigabyte P55M-UD4 (BIOS Rev 11)
ATi Radeon HD 4870 (1GB)
Corsair TX 650W
I've read a few things here and the opinion seems to be I need to up the voltage.
Do I need to do anything else?
Any help appreciated.
Comment