G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? Gaming Peripherals ? Gaming Keyboards

Gaming Keyboards Issue with gaming keyboard? Post a thread in here

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-04-2016, 09:43 PM
G.SKILL's Avatar
G.SKILL G.SKILL is offline
Administrator
 
Join Date: Jul 2008
Location: Taipei, Taiwan
Posts: 3,465
G.SKILL has disabled reputation
Default KM780 RGB & MX Firmware Downgrade/Reset

In some cases, firmware may be corrupt, causing usage issues on the KM780 MX/RGB keyboard. Please download and follow the instructions below to reset the firmware. The included firmware version is FW26 for KM780 MX and FW46 for KM780 RGB; please use the firmware update in the program files folder (folder name: FWUpdate) for later firmware versions. It's recommended to reinstall the software after resetting the firmware (similar to step 9c) to ensure matching firmware and software versions.



================================
-------- KM780 MX INSTRUCTIONS ----------
================================
Download link for KM780 MX: http://www.gskill.com/gskill-device/...M780_MX_26.zip

1. Locate the small hole under the leg standoff on the upper left corner (underside of the MR key).
2. Unplug the keyboard.
3. Use a paper clip, or something similar, and insert into hole. You should feel a click or something pressed down.
4. While it is being pressed, insert and connect both USB connectors. Keyboard will not function and LED will not light at this time.
5. Go to My Computer, there should be a drive with 64KB size (Drive Name: "CRP DISABLD" or "CRP1 ENABLD").
6. Delete the drive contents (should be a single file named "firmware.bin"), then copy the GSKILL_KM780_MX_V0018.bin file into the drive.
7. Remove the paper clip, and reconnect the USB again.
8. Once keyboard LED is lit up, confirm keyboard is functioning by pressing Windows key.
9a. Execute and run FWUpdate.exe from the "FWUpdate_KM780_MX_26" folder, with Administrator rights (right click on FWUpdate.exe and click "Run as Administrator"). Wait until update is complete.
9b. Alternatively, if the G.SKILL driver software is already installed, the paired firmware version can also be found at C:\Program Files (x86)\G.Skill\G.SKILL RIPJAWS KM780 MX\FWUpdate
9c. If G.SKILL driver software is not installed, you may obtain the latest firmware version by downloading and installing the G.SKILL latest software driver from the G.SKILL website. (www.gskill.com/en/download)



================================
-------- KM780 RGB INSTRUCTIONS ----------
================================
Download link for KM780 RGB: http://www.gskill.com/gskill-device/...780_RGB_46.zip

1. Locate the small hole under the leg standoff on the upper left corner (underside of the MR key).
2. Unplug the keyboard.
3. Use a paper clip, or something similar, and insert into hole. You should feel a click or something pressed down.
4. While it is being pressed, insert and connect both USB connectors. Keyboard will not function and LED will not light at this time.
5. Go to My Computer, there should be a drive with 64KB size (Drive Name: "CRP DISABLD" or "CRP1 ENABLD").
6. Delete the drive contents (should be a single file named "firmware.bin"), then copy the GSKILL_KM780_RGB_V0037.bin file into the drive.
7. Remove the paper clip, and reconnect the USB again.
8. Once keyboard LED is lit up, confirm keyboard is functioning by pressing Windows key.
9a. Execute and run FWUpdate.exe from the "FWUpdate_KM780_RGB_46" folder, with Administrator rights (right click on FWUpdate.exe and click "Run as Administrator"). Wait until update is complete.
9b. Alternatively, if the G.SKILL driver software is already installed, the paired firmware version can also be found at C:\Program Files (x86)\G.Skill\G.SKILL RIPJAWS KM780 RGB\FWUpdate
9c. If G.SKILL driver software is not installed, you may obtain the latest firmware version by downloading and installing the G.SKILL latest software driver from the G.SKILL website. (www.gskill.com/en/download)

Last edited by G.SKILL; 10-10-2016 at 07:01 PM. Reason: Adding KM780 RGB keyboard instructions
Reply With Quote
  #2  
Old 04-06-2017, 07:46 PM
OdinSon's Avatar
OdinSon OdinSon is offline
Junior Member
 
Join Date: Aug 2015
Location: Alabama
Posts: 12
OdinSon is reading into overclocking
Default

you're kidding cannot access this via programming

a paperclip


This firmware is Keylogging us I was on up to date drivers now I'm on MS drivers no gskill stuff and months later it just reoccurs?
__________________
MY RIG:
"THOR's Hammer"
http://www.modsrigs.com/detail.aspx?BuildID=35441
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2018, G.Skill International Enterprise