F2-8500CL5D-4GBTD + GIGABYTE GA-MA78GM-S2H BIOS settings

[GSKILL TECH]

Try increasing memory voltage to 2.1V to see if that will get rid of the BSODs.

Thank you
GSKILL SUPPORT

[andrewe77]

What should the Row Cycle Time be set to?

[TonyF]

Originally Posted by GSKILL TECH

These BIOS settings are ideal for running DDR2-1066 with the Trident Series.

In MIT,

DRAM Configuration (submenu)
DDRII Timing - Manual
CAS Latency - 5T
RAS to CAS R/W Delay - 5T
Row Precharge Time - 5T
Minimum RAS Active Time - 15T
1T/2T Command Timing - 2T
TwTr Command Delay - 4T
Trfc0 for DIMM1 - 127.5ns
Trfc2 for DIMM2 - 127.5ns
Trfc1 for DIMM3 - 127.5ns
Trfc3 for DIMM4 - 127.5ns
Write Recovery Time - 6T
Precharge Time - 3T
RAS to RAS Delay - 5T

Set Memory Clock - Manual
Memory Clock - 1066
DDR2 Voltage Control - +0.2V
Northbridge Voltage Control - +0.1V

Save and exit and your computer should be running smoothly.

Thank you
GSKILL SUPPORT

Those settings worked great but I don't have Trident series, I have the light blue ones. I have v1.1 of the board with BIOS F11 and a Phenom II x2 545. Also running a GeForce 8800GTS 640. Sweet.
Tony