Announcement

Collapse
No announcement yet.

Ausu 990fx r3.0 fx 8350,$gskill ram issues

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ausu 990fx r3.0 fx 8350,$gskill ram issues

    id like to say I have done the fallowing set up with this build set up

    MB; AUSU SABERTOOTH 990FX R3.0

    CPU; AMD FX 8350 BE

    GPU; FXF RX 480 8GB

    RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
    DDR3-1866 CL9-10-9-28 1.5V
    XMP PC3-1400 4GBX2

    DONE THE FALLOWING

    [FX or A Series CPU]

    Method 1.

    A. Enable DOCP/EOCP in BIOS.
    a. If unstable, raise CPU-NB Voltage in addition to the above.

    B. Set CPU-NB Voltage +0.05V to +0.1V depending on stability

    C. F10, save, exit, and everything should be ready to go.


    Method 2.

    A. Set DRAM Frequency to DDR3-1866

    B. Set DRAM Timings to tCL - tRCD - tRP - tRAS - Command Rate
    (that the memory is rated for)

    C. Set DRAM Voltage to what the memory is rated for.
    (Manually set even if default 1.50V)

    D. Set CPU-NB Voltage +0.05V to +0.1V depending on stability

    E. F10, save, exit, and everything should be ready to go.

    on that note my ram is running @ a freq of 936.15 but with windows memory issues
    Last edited by Mudafugas; 12-06-2016, 07:15 AM.

  • #2
    thought i could run my current ram @ 1800 same timings i suppose not


    http://dlcdnet.asus.com/pub/ASUS/mb/...419.1480659055
    Last edited by Mudafugas; 12-02-2016, 10:28 PM.

    Comment


    • #3
      936 x 2 = DDR3-1872

      DDR is double data rate so real frequency in MHz * 2 is the effective DDR frequency.

      Comment


      • #4
        ok so there is a xmp profile for the fallowing ram RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
        DDR3-1866 CL9-10-9-28 1.5V
        XMP PC3-1400 4GBX2

        what i am experiencing is my system constantly tells me to close programs as im low on memory i have check allocated memory ect i have came to a conclusion it is a windows 10 issue

        not sure what steps to take to accommodate this memory problem perhaps a fresh windows install ?

        Comment


        • #5
          Yes, that can help reset everything

          Comment

          Working...
          X