Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

How to enable XMP/manually overclock G.SKILL memory with ASUS X79 & SB-E or IB-E

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Sandy Bridge-E

    Comment


    • #47
      To give you an idea ... with those settings in #33 @4.2, and 11 Cores running 100% running the BOINC application, it runs at 72 degrees with the Corsair CPU water cooler running on medium setting.

      Comment


      • #48
        Was asking about the mobo - on the Extreme, others should be similar, go into BIOS to the Extreme tweaking part and go into DRAM TIMING CONTROL - if you insert a USB flash drive before you boot up, when you get into the BIOS every time you pull up a screen you want the info from - hit the F12 key and it will take an image of the screen in .jpg format and save it to the Flash Drive, then you can simply post the images on the forum rather than writing down and typing out all the advanced DRAM timings


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment


        • #49
          Do you want those now?

          Comment


          • #50
            The motherboard is a Asus Rampage IV Extreme (1 PCI-E x1, 5 PCI-E x16, 8 DDR3 DIMM, Audio, Gigabit LAN)

            Comment


            • #51
              Its a Flash Voyager 64Gb. When I boot up into the bios, the pen drive is not recognised by the ROG screen. The press of the F12 key registers, but ROG claims its not copied to the Flash Voyager Drive.

              Comment


              • #52
                Its 0520, signing off.

                Comment


                • #53
                  Might try it in a different USB slot


                  Pls offer comments on support I provide, HERE, in order to help me do a better job here:

                  Tman

                  Comment


                  • #54
                    Pen Drive had failed.

                    I've dug out another, and tried to upload - but get the upload error screen. That happens whether or not I upload from my PC or from my Webspace. Its a 1.6mb zip file so well within upload limits. Tried with another copy and also from my laptop, all the same symptoms, I get the error screen.

                    Also tried with a single screenshot, still get the error.

                    I shall retire bruised and battered

                    Comment


                    • #55
                      Files below ..... that-was-fun ..... you name it - it happened.

                      [ATTACH]330[/ATTACH] [ATTACH]331[/ATTACH] [ATTACH]332[/ATTACH] [ATTACH]333[/ATTACH] [ATTACH]334[/ATTACH]

                      I've beaten it into submission, so the next one(s) if needed, will not take longf.

                      Comment


                      • #56
                        Just got up and am headed into the field, will be back by noon or so (PST) and get a closer look


                        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

                        Tman

                        Comment


                        • #57
                          She-Who-Must-Be-Obeyed just yelled "Dinner" - back in an hour or so

                          Comment


                          • #58
                            Ok, things really look pretty good, might try the 4.2 and manually set vCore to 1.17 and DRAM to 1.68


                            Pls offer comments on support I provide, HERE, in order to help me do a better job here:

                            Tman

                            Comment


                            • #59
                              Thanks for that, cant do it immediately for a number of reasons, but will give it a whirl within the next couple of hours.

                              I've had it on 4.2Ghz for about 24hrs now (used to be the 3.9Ghz pre-set) with no other changes in any other values in the 3.9Ghz pre-set. So far so good.

                              I will enter the two changes you suggested and see what gives ..... many thanks, I greatly appreciate the assist

                              I'll report back with the result in a couple of hours or so.

                              Comment


                              • #60
                                Be out for a bit, then back, C U


                                Pls offer comments on support I provide, HERE, in order to help me do a better job here:

                                Tman

                                Comment

                                Working...
                                X