AMD 955BE + Ripjaws DDR3 + BioStar TA890GXB HD Compatible?

[thefrataline]

So I have those parts listed in the title and I can't seem to get the ram to run at the marketed 1600mhz. I'm pretty sure all of the timings are right. It just keeps reporting that it is running at 667mhz. I have 4x2Gb sticks or ram and right now the 955 BE is at the stock 3.2Ghz. If someone could help me that would be awesome
(Link to CPU-Z validation)
http://valid.canardpc.com/show_oc.php?id=1706831

[Tradesman]

For 4 sticks at 1600 will prob need to OC a bit and raise CPU and CPU/NB voltages - could you post your BIOS settings

[thefrataline]

CPU-Z validation
http://valid.canardpc.com/show_oc.php?id=1707844

AMD Overdrive Shows the ram timings
http://i1009.photobucket.com/albums/...ramtimings.jpg

[Tradesman]

Looks like it at default speed 3.2, as said, prob need a bit of an OC and have to adjust some voltages which don't appear in your pics

[thefrataline]

What do I need to adjust? I can easily OC the Cpu to 3.9Ghz and be stable. the bus would be at 215 and multiplier at 18.5x. I can take pictures of what the bios looks like if you want

[Tradesman]

If you can run 3.9, the sticks should be fine at rated speed or might need additional voltage of say +.01 to the CPU/NB and possible +.05 to the DRAM itself at spec timings (and CR at 2N or 2T)

[thefrataline]

I know they can run that fast I just dont know how to get them to do it. I have the preset 1600mhz in the bios and its reporting as 667mhz

[Tradesman]

667 is the speed/frequency which means they are running at 1333, will want to change the 667 to 800 in the BIOS

[thefrataline]

OHHHH ok! That helps me out a ton. Now I know what I'm looking for