Firmware update under 2 x falcon II in raid 0 as OS drive

[whiteze]

ok lets clarify ,what you saying is ,this http://www.gskill.us/forum/showthread.php?t=2496 should work for Falcons v.2 ? if so ,why in config file these arent listed?

those are falcons that are in SSDType.cfg file :

G.SKILL Falcon 64GB SSD (FM-25S2S-64GBF1)
G.SKILL Falcon 128GB SSD (FM-25S2S-128GBF1)
G.SKILL Falcon 256GB SSD (FM-25S2S-256GBF1)

my SSD : FM-25S2l-128GBF2


i coldnt see any other firmware to download

[gingerbee]

I have read the whole post and it sounds like you tried to update a falcon 2 ssd with falcon 1 firmware.
from what i can tell there is no falcon 2 firmware yet.
updating firmware is real easy
1. put jumper on
2. set sata to ide mode
3. run firmware update
4 make sure your using the right firmware cause the 1 you linked is fro my falcon 1 not falcon 2
you may have screwed your drive buy trying to update with the wrong firmware. good luck

[whiteze]

I see ,fair enough ,if there is no firmware for v.2 falcons simply cant re-flash it ,looks like need to go for RMA ,thanks for all the answers .

Regards