Announcement

Collapse
No announcement yet.

No BIOS, No POST, Stuck on DRAM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • No BIOS, No POST, Stuck on DRAM

    Hi!

    I built a new gaming PC and these are its specs:
    • Motherboard: Gigabyte Z490 VISION G (1.x)
    • RAM Sticks: F4-2666C18D-16GTZR (Trident-Z-RGBDDR4-2666MHz-CL18-18-18-43-1.20V16GB-(2x8GB))
    • CPU: Intel Core i5 10500
    Whenever I boot my PC up, the screens do not turn on because the computer does not pass the POST process.
    When I look at the motherboard it jumps from CPU LED to DRAM LED a couple of times and then it gets stuck on the DRAM which indicated that there's a problem with the RAM.

    The weird thing is: The RAM sticks work individually fine. As long as there's only 1 RAM stick connected, the PC boots normally.
    No matter what configuration I place the RAM sticks in, it never works when there are 2 connected simultaneously.

    Tests I've done:
    1. Checked each RAM Stick individually - Loads normally.
    2. Checked each RAM Slot individually - Loads normally.
    3. Using DDR4-A1 and DDR4-B1 - Doesn't work.
    4. Using DDR4-A1 and DDR4-B2 - Doesn't work.
    5. Using DDR4-A2 and DDR4-B2 - Doesn't work.
    6. Using DDR4-A2 and DDR4-B1 - Doesn't work.
    Then, I updated my BIOS drivers from F3 to F20d. After my BIOS updated, none of the G.Skill RAM sticks work anymore and an older DDR4 sticks work just fine...

    I'd appreciate some help with this issue.

    Thank you!

  • #2
    Anything? I'm completely stumped..

    Comment

    Working...
    X